Nuclear Industry Yantai Toncin Group Co.,Ltd.

  • Single Multifilament Filter Cloth
  • Double-layer Monofilament Filter Cloth
  • Flocculant
  • Agricultural and Forestry Water-retaining Agent
  • Quartz Ceramic Crucible
  • FGD Vacuum Belt Dehydrator
  • ZPL Series Filter Cloth Type of Disc Dewatering Machine
  • SGN Deep Cone Paste Thickener
  • GNZ Centre Drive Efficient Thickener
  • DY Serial Filter Press
  • Ecological Airbag Bracing Dam
  • Rubber Dam
  • Unmanned Aerial Vehicle
  • Health and Safety
  • Management standard
  • Toncin promises
  • About Us
  • Speech
  • News
  • HOME / Complete Equipment & Technology / SSPF Smart Filter press
    SSPF Smart Filter press
    The SSPF smart row plate filter press is a fast opening and closing plate filter press which mainly consists of the electrical control system, hydraulic control system and the main engine. When the equipment is in operation, the mechanical transmission mechanism drives the hydraulic cylinder and drags it to reach the designated position. After the hydraulic cylinder is locked by the locking device, the hydraulic cylinder protrudes and the filter plates of the filter press are pressed tightly to form a filter chamber between the adjacent filter plates, with peripheries sealed. The materials enter each filter chamber from the feeding hole through the feeding pump at a certain pressure. The solid-liquid separation is achieved by the pressure difference formed between the two sides of the filter medium by the feeding pressure of the feeding pump. After that, the materials are trapped in the filter chamber and the filtrate is discharged from the water hole of the filter plate through the filter cloth. After a period of time when the filtrate no longer flows out, the filtration and dehydration process is completed. You shall stop feeding and determine whether to perform high pressure diaphragm squeezing, washing and drying in light of the process requirements. Then the hydraulic cylinder is retracted, the locking device in unlocked, the mechanical transmission mechanism drives the hydraulic cylinder, pulls out the filter plates and removes the filter cake and the equipment will enter the next filtration cycle after the filter cloth is cleaned.
    High-pressure automatic filter cloth cleaning device

    High pressure automatic filter cloth cleaning ensures the regeneration of filter cloth.

    Filter cake vibrating device

    With the filter cake vibrating device, the filter cake is easier to fall off from the filter cloth.

    Service Support

    Whole Technological Design

    Toncin determines reasonable plans and selections by conducting more systematic laboratory tests, semi-industrialization tests and theoretical analysis calculations and adopting appropriate methods in light of the actual problems faced by customers. And it determines specific parameters through laboratory tests and semi-industrial tests.


    Project Construction

    Toncin can provide customers with integrated project services for its perfect project management system and experienced high-quality team and can also provide customers with its best services in achieving the ultimate project goal by carrying out the management work on the project quality, schedule, safety, cost, procurement, information files, organization and coordination etc. according to customer’s contractual documents. Toncin contracts the design, procurement, construction and trials etc. for the entire process or some certain stages of the construction project according to the contract and takes full liability for the quality, safety, duration and cost etc. of the contracted project.


    Response Time and After-sales Services

    If any failure due to a defect has occurred during the warranty period, our company has given the following response and promise: to respond within 12 hours and rush to the domestic scene within 72 hours. With a rigorous and efficient service architecture, diverse and flexible service and response means, Toncin is capable of providing response service up to 7* 24 hours to ensure that users can get help at any time during the warranty period.


    Specification Parameters

    Model filtration area(m2)

    amount of filter
    layer (layer)

    volume of filter chamber
    (m3)

    Dimensions
    (L×W×H) (m)

    Weight (T)

    Hydraulic power
    (KW)

    specificationsof filter plate mm

    SSPF 40

    13

    0.7

    6.8×3.9×6.1

    25

    18.5

    1500×1500

    SSPF 60

    19

    1.1

    8.0×3.9×6.1

    28

    SSPF 80

    25

    1.5

    9.2×3.9×6.1

    35

    30

    SSPF 100

    31

    1.8

    10.4×3.9×6.1

    38

    SSPF 120

    37

    2.2

    11.5×3.9×6.1

    41

    SSPF 140

    43

    2.6

    12.7×3.9×6.1

    44

    SSPF 160

    49

    2.9

    13.9×3.9×6.1

    47

    SSPF 180

    55

    3.3

    15.0×3.9×6.1

    50

    SSPF 200

    61

    3.7

    16.2×3.9×6.1

    53

    SSPF 220

    67

    4.0

    17.4×3.9×6.1

    56

    SSPF 240

    73

    4.4

    18.5×3.9×6.1

    59

    Product Advantages

    Low product water content: the final moisture of the material can be less than 6%. In filtering the flotation fine tailings of copper, lead, zinc, silver, antimony, molybdenum, phosphorus and gold etc, the economic moisture content can be < 10%.

    High production capacity: Under the same conditions its capacity per unit area is 5-10 times that of ordinary chamber press filters or plate and frame press filters. The maximum production capacity is to process 10,000 tons of dry slag per day, saving users a lot of land acquisition, plant and infrastructure investment.

    Simple structure, long service life: The thrust plate, pressure plate, main beam and cross beam in normal use are all guaranteed not to break for 5 years.

    Adaptability. It has operating examples in high altitude (4700m), low concentration (feeding concentration 15%) and fine particles (-400 mesh accounts for 95%), in which the filter cake moisture content is still <10%.

    Smart Control: Through the PLC+ touch screen intelligent control, a single operation cycle (from pressing the filter plates, feeding, pipe cleaning, squeezing, drying and pulling to discharging) is auto-completed with a single button, which greatly reduces labor intensity.


    Picture show
    20171010113735_303.jpg
    20171010113735_303.jpg
    20171010113736_627.jpg
    20171010113736_627.jpg
    20171010113737_470.jpg
    20171010113737_470.jpg
    20171010113737_733.jpg
    20171010113737_733.jpg
    20171010113738_221.jpg
    20171010113738_221.jpg